Advanced Search


7218-15 Print

FO412-02, Ver A, Mars 2000
Created 04/2002 Modified 10/2010 07:56 AM

Product: 7218-15

TECHNICAL DATA SHEET


THERMOBOND 7218-15
HOT MELT ADHESIVE



DESCRIPTION:

THERMOBOND 7218-15 is a chalk white colored, medium viscosity and moderately fast setting hot melt glue stick. It is designed to be a dual temperature glue stick, which can be used either in a low temperature or regular temperature glue gun. It is suitable for bonding between plastic, fabric, wood and paper. THERMOBOND 7218-15 exhibits very good low temperature bonding characteristics and impact resistance.

PHYSICAL PROPERTIES:

Basic Material: Synthetic Resin(Ethylene Vinyl Acetates)
Appearance: Chalk White stick
Viscosity(Brookfield Thermosel, Model RVDV-III, Spindle # 27) Temperature (°C,°F) Viscosity (cPs)
Average cPs Variance cPs
180°C(302°F) - 4,600 500
Softening point °C (°F): 83.5 +/-5°C
Set Time: 8 - 10 seconds
Open Time: 15 - 20 seconds
Water Resistance: Excellent
Application temperature: 120°C to 185°C


FDA STATUS:

THERMOBOND 7218-15 compositions meet requirement of in-direct food additives regulation 21 CFR 175.105 - Adhesives.

APPLICATION METHOD:

  • Hot melt glue gun


PACKAGING:

  • 25kg cartons


PRECAUTION:

  • Keep unused adhesives in closed carton and away from dusty area. Glue applicator is hot, avoid touching any part of the applicator other than its glue tank handle when adding new glues.


If you need additional information, do not hesitate to contact your technical representative.

Always test product on your particular application prior to use.
Please refer to Material Safety Data Sheet before use.
For Industrial Use Only

IMPORTANT


The information given and the recommendations made herein apply to our products alone and not combined with other products. This information is based on our research and on data from reliable sources and is believed to be accurate. No guaranty of accuracy is made. It is the purchaser's or the user's responsibility before using any product to verify this data under their own operating conditions and to determine whether the product is suitable for their purposes.



Approuved