Personnal
Industrial
Sold out

Produits similaire

Sku3023A-1
Product type
 Adhesive
ColorWhite
Colors
Description

ADBOND 3023A-1 is a type 1 polyvinyl acetate adhesive used in conjunction with catalyst ADBOND 3023CB-1. It can be use on solid wood (including exotic wood), mdf, particle board, plywood, laminates or wood veneer. ADBOND 3023A-1 (with catalyst ADBOND 3023CB-1) has excellent water resistance, very good heat resistance, good resistance to static load and very fast setting speed in room temperature cold press, hot press and radio frequency press. It gives better initial strength when use in hot press with the catalyst addition.

  • Kitchen doors and cabinets assembly
  • Lamination
  • General assembly
  • Hot or cold press.
  • Membrane press

DOWNLOAD THE TDS

DOWNLOAD THE SDS

Features

Application

ADBOND 3023A-1 can be applied with squeeze bottle, brush, roller, pneumatic gun or mechanical roller coater. For roller coater application, apply 9-14 mils wet film thickness. Typical assembly time should be between 10 to 20 minutes depending on temperature and adhesive film thickness. Assembly should be pressed at least 60 minutes. Depending on component type use in assemblies, machining steps can be achieved 4 hours after press or clamp release. Press time can be reduced to 90 seconds with usage of a hot press at a temperature of 194°F (90°C). Consult your technical representative for more details.

Documents